MimioTeach Interactive System

100% of 100
Single-Touch (Pen) 80"- 120" Ultrasound/ Infrared Projection- 16:9 Aspect Ratio
Special Price $849.00 was $1,200.00
Availability: In stock
Shipping Cost: $45
  • The ability to convert any conventional dry erase board into an interactive whiteboard
  • Magnetically mounts onto any whiteboard or flat surface making it fully interactive as well as portable
  • Mounting clips are used when MimioTeach is to be attached on a non-magnetic surface
  • Conveniently setup just by plugging in the MimioHub wireless receiver and launching the MimioStudio software
  • Boosts classroom interactivity and engagement
  • Livens up and makes teaching lessons more collaborative with audio and video facilities while using the computers microphone
  • With the NEW collaboration feature, MimioStudio Software can connect up to 50 students to work on the one activity
  • Connects up to 3 mobile devices using the MimioMobile application
  • With the MimioStudio Software users have the ability to plan, create, import, engage and excite students


The MimioTeach interactive system is a portable interactive device that is capable of transforming any whiteboard or any flat surface into a fully collaborative whiteboard solution. By simply inserting the MimioHub wireless receiver into the computer, connecting a projector and an interactive projected area of 80”-120” will be displayed. The automatically rechargeable MimioTeach stylus controls every action made on to the interactive projected area wirelessly.

Moreover, the MimioStudio Software makes the interactivity much more appealing with the variety of different collaboration tools. With the help of MimioStudio software, MimioTeach has the ability to connect up to 3 mobile devices connections with its new MimioMobile app. This way content can be shared with mobile devices resulting in more responsive learning. In addition to this, the new expanded collaborative feature allows up to 50 student devices with a combination of any mobile device that has MimioMobile application installed into it making learning highly interesting and communicative.

Everywhere, Anywhere

MimioTeach Interactive System gives the user the spectacular ability to transform any standard whiteboard as well as any flat surface into a pen-driven Interactive system.

Hassle – Free

MimioTeach Interactive System can be magnetically installed on to the flat surface with no complications. It is a simple procedure which is guaranteed to provide the user with astonishing results. Furthermore, it comes with mounting clips for non – magnetic surfaces.

Portability at its max

MimioTeach Interactive System is designed entirely to be highly transportable. This handy ability to be so portable is one of the device’s best selling features.

Collaboration at its finest

The MimioStudio Software allows the Interactive System to connect with 50 students simultaneously. This helps teachers in enhancing the interest and participation of the students, resulting in a more effective lesson.


Basic Attributes
Product NameMimioTeach Interactive System
Number of Touch Inputs1
Touch InterfaceUSB
Surface TypeAny Flat Surface
Projection Range (Inches)80 - 120
Aspect Ratio16:9
Input MethodStylus
Touch Sensing TechnologyInfrared
Operating SystemWindows, Mac, Linux
Dimensions (H”x W”x D”)14.8 x 2.7 x 1.5
Warranty2 years, extended to 5 years on all hardware components except batteries
Power Requirement5V - 100mA DC via micro-USB
Included SoftwareMimioStudio
Included AccessoriesRechargeable stylus, MimioHub wireless receiver, USB micro-B cable, magnetic mounting bracket, 5V 1.2A USB power supply, and MimioStudio software license
Country of OriginChina
Write Your Own Review
You're reviewing:MimioTeach Interactive System
Your Rating
MimioTeach bar with embedded wireless interface, rechargeable stylus, MimioHub wireless receiver, USB micro-B cable, magnetic mounting bracket, 5V 1.2A USB power supply, and MimioStudio software license  

Minimum Software Requirements
MimioStudio on a Windows, Mac, or Linux OS.  
Computer Interface
USB (USB 2.0 compliant).  
USB Cable—“micro-B” USB connector. MimioHub will connect via USB to the PC.  
Data Transfer Rate—USB
Full-speed USB (12 Mbps).  
Power Consumption
5V - 100mA DC via micro-USB  
MimioTeach Bar Dimensions
375.4 mm H x 68 mm W x 38 mm D (14.8 in. H x 2.7 in. W x 1.5 in. D)  
Bar: 305 g (10.75 oz)  
Stylus: 30 g (1 oz)  
Bar and Stylus: 335 g (11.82 oz)  
Whiteboard Active Area (per device)
Interactive mode with projector supports 1.5 m x 2.4 m (5 ft x 8 ft), up to 2.5 m (8.3 ft) standard aspect-ratio diagonal projection display, and 2.9 m (9.4 ft) diagonal in wide-screen mode.  
Ergonomically elegant stylus for interactive use. Ultrasound at 40 kHz (frequency) + Infrared at 940 nm (wavelength).  
Uses single 3.7 V Lithium-Ion rechargeable cell with 70 mAh capacity. Stylus recharges when docked in cradle on left side of MimioTeach.  
The battery life of the MimioTeach stylus is approximately 90 hours under typical classroom use.  
Two buttons on the stylus activate functions: Right Click and MimioStudio Tools. Solid Teflon stylus with replaceable tip ensures ultrasmooth action on all board or screen surfaces.  
Resolution & Tracking Speed
Signal tracking frequency 87 times per second. Signal tracking speed 2.7 m (9 ft) per second. 4,800 x 9,600 line effective resolution on 1.2 m x 2.4 m (4 ft x 8 ft) board.  
MimioTeach bar should be mounted in the center of the left side of the whiteboard in a location outside the projection area. Sensors must face a projected surface that is within the maximum Active Area range of the device. Minimum 3 inch gap between edge of projected image and edge of MimioTeach bar.  
Controls & Indicators
2 push-button functions on the MimioTeach bar: Calibrate/ Re-calibrate and Launch. 1 Indicator: Link.  
Operating:16°C to 38°C (60°F to 100°F). (Higher than 80°F/27°C will cause slight inaccuracy for ink capture).  
Storage: -20°C to 35°C (-4°F to 95°F.) (1 year set by battery) -20°C to 45°C (-4°F to 113°F). (1 month set by battery) -30°C to 60°C (-22°F to 140°F). (Absolute Maximum  
Operating: 15% to 75% noncondensing. Storage: 0% to 90% non-condensing.  
Wireless Connectivity
Enables a dedicated 2.4 GHz bidirectional point-to-point wireless connection to the computer through MimioHub, a USB “thumb drive” receiver with maximum range of 9 m (30 ft). Does not require Bluetooth, special card, wireless networks, or wireless PC. MimioHub is a standard USB device using HID drivers, and comes paired with MimioTeach. MimioHub can be stored in the back slot of the MimioTeach bar when not in use.  
Wireless Data Transfer Rate
250 Kbps  
Certification & Compliance
Wireless: FCC, IC, CE, C-Tick, COFETEL  
Safety: UL (CE & TUV NRTL) C-Tick, NOM, EAC, ANATEL. EMC,: FCC, IC, CE, C-Tick, EAC, ANATEL.  
Environmental: RoHS, REACH compliant.  
International Use
Computer USB or batteries as primary power source enable “Start up and Go” in any country. International AC Adapter for AC-powered use.  
Warranty and Support
Mimio hardware is warranted for 2 years from date of purchase, with an additional 3 years with product registration at mimio. com/warranty within 90 days of product receipt date, for a total of 5 years. MimioStudio software is supplied with a limited lifetime warranty, expiring 1 year after discontinuation of the product.  
Other Accessories Available
USB extension cable, metallic mounting brackets w/removable adhesive strips for non-metallic surfaces, stylus, replaceable Lithium-Ion battery for stylus, global AC adapters.  

MimioTeach Interactive System Resources

MimioTeach Interactive System Demo Video

MimioTeach Interactive System

Unlike conventional interactive whiteboards, the small and portable MimioTeach interactive system transforms any ordinary whiteboard into a state-of-the-art teaching tool quickly and easily. The system includes the wireless MimioTeach bar and rechargeable stylus. It's so easy to set up it'll be ready in just a few minutes simply place the MimioTeach bar onto your classroom whiteboard plug in the Mimiohub wireless receiver and launch the MimioStudio software. Push the calibration button on the bar and the software will lead you through the process.
Read More ...
  • Rechargeable stylus
  • MimioHub wireless receiver
  • USB micro-B cable
  • Magnetic mounting bracket
  • 5V 1.2A USB power supply
  • MimioStudio software license

Q: How do I set up the MimioTeach Interactive System?

A: To set up the Interactive System, the users need to only attach it to a flat surface and plug it in a USB power source.


A: What are the power requirements of the Interactive System?

A: The Interactive System is powered by the USB port of your computer.


Q: Which operating systems are compatible with the MimioTeach System?

A: The Interactive System is compatible with all the contemporary operating systems.


Q: Can the Interactive System recognize command from my fingers?

A: No, the MimioTeach only recognizes commands from a stylus.


Q: Do I get a warranty with the product?

A: Yes, the Interactive System comes with a 2 – year warranty.